REPAIRS & MAINTENANCE

Surf Ski - Major repair

Surf Ski - Major repair

This Surf Ski had cracked down the length of the kayak approximately 3ft long. We offered a fast turnaround repair within a few days of being given the kayak to...

Surf Ski - Major repair

This Surf Ski had cracked down the length of the kayak approximately 3ft long. We offered a fast turnaround repair within a few days of being given the kayak to...

EPO3 Rudder Re-Build

EPO3 Rudder Re-Build

This EPO-3 Rudder was damaged when sailing. We dried out the rudder, sanded back the damaged area and began to reinforce the leading edge.   The repair was grinded down...

EPO3 Rudder Re-Build

This EPO-3 Rudder was damaged when sailing. We dried out the rudder, sanded back the damaged area and began to reinforce the leading edge.   The repair was grinded down...

Hobie Dragoon Bow Hole Fix

Hobie Dragoon Bow Hole Fix

This Hobie Dragoon had a loose bolt that was starting to risk further damage to the bow. For the repair, we filled and rebuilt the area around the bolt hole...

Hobie Dragoon Bow Hole Fix

This Hobie Dragoon had a loose bolt that was starting to risk further damage to the bow. For the repair, we filled and rebuilt the area around the bolt hole...

Hobie Dragoon Skeg Reinforcement

Hobie Dragoon Skeg Reinforcement

After 15 years of being dragged around on the beach, this Hobie Dragoons fiberglass needed rebuilding. 

Hobie Dragoon Skeg Reinforcement

After 15 years of being dragged around on the beach, this Hobie Dragoons fiberglass needed rebuilding. 

Hobie Dragoon Stern Re-Build

Hobie Dragoon Stern Re-Build

The rudder casting had ripped out of this Hobie Dragoon and required rebuilding.

Hobie Dragoon Stern Re-Build

The rudder casting had ripped out of this Hobie Dragoon and required rebuilding.

Hobie 16 Front Hull Reinforcement

Hobie 16 Front Hull Reinforcement

The front bolts on this Hobie had been worn down entirely and was at risk of pulling through. We decided to re-build the entire bow section. 

Hobie 16 Front Hull Reinforcement

The front bolts on this Hobie had been worn down entirely and was at risk of pulling through. We decided to re-build the entire bow section.